Non-Ferrous Products

Non-Ferrous Products
ALUMINIUM:
Aluminium, Aluminium Bronze, Manganeese Bronze.

FORMS :
Round Hexagonals, Squares, Rods, Tubes, Sheets, Strips, Foils, Busbars, Plate, Flats, Wire, Tubings, Sections & Bushes


ROLLED PRODUCTS

SHEET

COIL

PLATE

BUILDING (ROOFING) SHEET

TREAD / CHEQURED/FLOORING SHEET & PLATE

STUCO SHEET & COIL

CLOSURE STOCK

FOIL

CLOSURE / FIN STOCK

EXTRUDED PRODUCTS

ROD

FLAT BAR

SQAURE BAR

HEX BAR

ROUND TUBE

SQAURE TUBE

RECTANGULAR TUBE

ANGLE

CHANNEL

I BEAM

T SECTION

OVAL TUBE

TRANPORT PROFILE

ARCHITECTURAL /BUILDING PFOFILE

BUS BAR & TUBULAR

HEAT SINK

INDUSTRIAL PROFILE

CUSTOMISE/SPECIAL PROFILE


TOP
Brass

We offer excellent quality Brass Sheets and Plates as per the demand of the customer. The Brass Roofing Sheets manufactured by our company are available in various compositions like 70-30, 63-37, 60-40. The hardness and size of brass sheets provided by us may differ depending on the requirement of the customer. We offer best quality brass sheets at nominal charges and are known widely as one of the well known Polished Brass Plate Manufacturers in the market.

BRASS:
Free Cutting Brass, Leading Brass, Foreign Brass, Reviting Brass, Lead Free Brass, Neval Brass.

FORMS :
Round Hexagonals, Squares, Rods, Tubes, Sheets, Strips, Foils, Busbars, Plate, Flats, Wire, Tubings, Sections & Bushes.

Specifications

Size : 1000mm to 2500mm
Thickness : 0.3mm to 25mm

Standard Sizes

Thickness

1000mm ? 2000mm

1.2mm to 16mm

1250mm ? 1250mm

1.2mm to 25mm

1250mm ? 1250mm
1.2mm to 12mm

14" ? 48"

0.3mm to 25mm



TOP


Copper

Leading Manufacturer and Exporter of Copper Products such as Copper Pipes, Copper Tubes, Copper Foils, Copper Rods, Copper Flats and Copper Butt Weld Fittings from Mumbai. Where low maintenance and corrosion resistance is required, stainless steel plates are a natural choice and are used in a diverse range of applications from modern architecture for cladding or fascias, to the food hygiene industry due to its anti-bacterial qualities.

Copper
Electrolytic Copper, Electrolytic Tough Pitch Copper, Deoxidised Copper, General Purpose Commercial Copper.

FORMS :
Round Hexagonals, Squares, Rods, Tubes, Sheets, Strips, Foils, Busbars, Plate, Flats, Wire, Tubings, Sections & Bushes

Dimensional parameters
Type Dimensional yardstick
sheets Standard Size: 14" x 48" / 356.00 mm x 1220.00 mm
Length : 14" / 356.00 mm
Width : 48" / 1220.00 mm
Thickness : 0.20 mm - 6.00 mm
cut length
All customized as per the customer's requirements
Length : Upto 2000.00 mm
Width : Upto 610.00 mm
Thickness : 0.20 mm - 6.00 mm
coils Standard Size : 14" / 356.00 mm
Length : Running (as per the customer's requirement)
Width : 14" / 356.00 mm
Thickness : 0.045 mm - 2.30 mm
strips Standard Size : 14" / 356.00 mm
Length : Running (as per the customer's requirement)
Width : 8.00 mm - 400.00 mm
Thickness : 0.045 mm - 2.30 mm
circles All customized as per the customer's requirement
Diameter : Upto 26" / 660.00 mm
Thickness : 0.50 mm - 2.50 mm
pharmas All customized as per the customer's requirementin different shapes
for eg. Stars, oval, etc.


TOP
Gunmetal, Phosphor Bronze

Our company is highly acclaimed in offering a wide range of PhosphorBronze.

The specifications of this product include :

BS2870 / BS2875 : PB103 - BS2874 : PB102 - NES838 BS2874 : PB104/ BS B24 (DTD265A*) (Colbronze) - BS1400 : PB1 ASTM B139 : C54400 (Colphos 90).

Phosphor Bronzes, more accurately described as Tin Bronzes, are alloys of copper where tin is the main alloying element with phosphorus added primarily as a deoxidant. Alloys containing up to about 9% tin are wrought. Alloys containing from about 10-12% tin are used as-cast. They are strong, corrosion resistant alloys with many traditional uses in marine environments and in electrical and electronic engineering where their especially at the higher cast level, imparts good wear resistance for traditional use in bearing components.

Chemical Composition :

Cu Remainder
Sn 4.00 - 5.50
Pb 0.02 Max.
Ni 0.30 Max.
Fe 0.10 Max.
Zn 0.30 Max.
P 0.02 - 0.40
Total Impurities 0.50 Max.


Mechanical Properties :

%Elongation at 5.65Sq.Rt So G.L. 12.00 Min.
U.T.S. N/mm Sq. 500 Min.
0.2% P.S. N/mm sqr. 410 Min.
Size Over 6 mm to 18 mm



TOP